Brother International NX-450Q Users Manual - English - Page 106
Satin stitching using the, sewing speed controller
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Slide the drop feed lever, located at the rear of d the machine on the base, to (to the left as seen from the rear of the machine). Satin stitching using the sewing speed controller A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the sewing machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly a and easily be adjusted. In this case, the sewing speed is adjusted with the foot controller. a Feed dog position switch (as seen from the rear of the machine) X The feed dogs are lowered. Connect the foot controller. a • For details, refer to "Starting to sew" (page 52). Turn on the sewing machine, and then select a e stitch. Attach zigzag foot "J". • For details, refer to "Selecting stitching" (page b 3 72). J Use both hands to hold the fabric taut, and f then move the fabric to follow the pattern. Reinforcement stitches are sewn at the beginning and end of sewing. 1 • For details, refer to "Replacing the presser foot" (page 41). Turn on the sewing machine, and then press c (Settings key) in the operation panel. X The settings screen appears. a Pattern After sewing is finished, slide the drop feed g lever to (to the right as seen from the rear of the machine) to raise the feed dogs. Press or (Stitch length keys) until d is displayed. a a Drop feed lever (as seen from the rear of the machine) • Normally, the drop feed lever is positioned at the right. X The screen for specifying that the stitch width can be controlled with the sewing speed controller appears. Appliqué, Patchwork and Quilt Stitching 105