Brother International NX-450Q Users Manual - English - Page 40
Checking the needle, Replacing the needle
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Checking the needle Replacing the needle Sewing with a bent needle is extremely dangerous Replace the needle as described below. Use the since the needle may break while the machine is being operated. screwdriver and a needle that has been determined to be straight according to the instructions in "Checking 1 Before using the needle, place the flat side of the the needle". needle on a flat surface and check that the distance between the needle and the flat surface is even. Press ("Needle Position" button) once or a twice to raise the needle. 1 2 a Flat side b Needle type marking ■ Correct needle 1 a "Needle Position" button Turn off the sewing machine. b 1 a Flat surface ■ Incorrect needle If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle. CAUTION ● Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if ("Start/Stop" button) is accidentally pressed and the machine starts sewing. Place fabric or paper under the presser foot to c cover the hole in the needle plate. 1 a Flat surface Note z Before replacing the needle, cover the hole in the needle plate with fabric or paper to prevent the needle from falling into the machine. Replacing the Needle 39