Brother International NX-450Q Users Manual - English - Page 36
select the twin needle setting, otherwise
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Select a stitch. k • For details on selecting a stitch, refer to "Selecting stitching" (page 72). Start sewing. m • For details on starting to sew, refer to "Starting to sew" (page 52). • For details on the stitches that can be sewn with the twin needle, refer to "Stitch Settings" (page 134). X Two lines of stitching are sewn parallel to each other. 1 CAUTION ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Press l (Needle mode selection key). X (Needle mode selection key) lights up, and the twin needle can now be used. • To return to single needle sewing, press (Needle mode selection key) until the key is no longer lit. • Even after the sewing machine is turned off, the twin needle setting is not cancelled. CAUTION ● When changing the sewing direction, press ("Needle Position" button) to raise the needle from the fabric, and then raise the presser foot lever and turn the fabric. Otherwise the needle may break or the machine may be damaged. ● Do not try turning the fabric with the twin needle left down in the fabric, otherwise the needle may break or the machine may be damaged. CAUTION ● When using the twin needle, be sure to select the twin needle setting, otherwise the needle may break or the machine may be damaged. Upper Threading 35