Brother International NX-450Q Users Manual - English - Page 118
turn the handwheel toward
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Start sewing. d Select stitch 39 . c • For details, refer to "Selecting stitching" (page 72). CAUTION ● Select a stitch width of 6.0 mm (15/64 With the right side of the fabric facing up, sew d along the right edge of the frayed section. inch) or less, otherwise the needle may bend or break. ● After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the N 3 needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break. Partially removing threads is called "drawnwork". Press e panel. (Settings key) in the operation This gives a beautiful result with fabrics that have a loose weave. X The settings screen appears. Two ways to create drawnwork are described below. ■ Drawnwork (Example 1) Press or (Stitch length keys) until f is displayed. Pull out several threads from the fabric. a Attach monogramming foot "N". b X 9The screen for mirror imaging the pattern appears. • For details, refer to "Replacing the presser foot" (page 41). Decorative Stitching 117