Brother International NX-450Q Users Manual - English - Page 24
Caution
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Turn on the sewing machine. a Place the spool of thread for the bobbin onto f the spool pin. Slide the spool onto the pin so that the spool is horizontal and the thread unwinds to the front at the bottom. 1 Open the top cover. b Place the bobbin on the bobbin winder shaft so c that the spring on the shaft fits into the notch in the bobbin. Press down on the bobbin until it snaps into place. 1 • If the spool is not positioned so that the thread unwinds correctly, the thread may become tangled around the spool pin. Slide the spool cap onto the spool pin. g Slide the spool cap as far as possible to the right, as shown, with the rounded side on the left. 2 a Notch b Bobbin winder shaft spring Slide the bobbin winder in the direction of the d arrow until it snaps into place. CAUTION ● If the spool or the spool cap is not positioned correctly, the thread may become tangled around the spool pin and the needle may break. ● Three spool cap sizes are available (large, medium and small), allowing you to choose a spool cap that best fits the size of spool being used. If the spool cap is too small for the spool being used, the thread may catch on the slit in the spool and the needle may break. • ("Start/Stop" button) lights up in orange. Remove the spool cap that is inserted onto the e spool pin. 1 2 a Spool pin b Spool cap Winding/Installing the Bobbin 23