Brother International NX-450Q Users Manual - English - Page 88
When opening the buttonhole with the, seam ripper, do not place your hands in, the cutting direction
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Gently hold the end of the upper thread in g your left hand, and then start sewing. 1 X Once sewing is completed, the machine automatically sews reinforcement stitches, then stops. a Eyelet punch • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. Cut the threads, raise the presser foot lever, h and then remove the fabric. CAUTION 3 Raise the buttonhole lever to its original i position. ● When opening the buttonhole with the seam ripper, do not place your hands in Insert a pin along the inside of one bar tack at j the end of the buttonhole stitching to prevent the cutting direction, otherwise injuries may result if the seam ripper slips. the stitching from being cut. ■ Changing the density of the stitching 1 Adjust the stitch length. - + a Pin Use the seam ripper to cut towards the pin and k open the buttonhole. 1 a Seam ripper For keyhole buttonholes, use the eyelet punch to make a hole in the rounded end of the buttonhole, and then use the seam ripper to cut open the buttonhole. • For details, refer to "Adjusting the stitch length" (page 59). • If the fabric does not feed (for example, if it is too thick), decrease the density of the stitching. Buttonhole Stitching/Button Sewing 87