Brother International NX-450Q Users Manual - English - Page 31
and then pull it up.
View all Brother International NX-450Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
GETTING READY While holding the thread lightly with your h right hand, pull the thread with your left hand, and then pass the thread behind the thread guide cover and to the front. 1 a Thread guide cover Pass the thread under the thread guide plate, i and then pull it up. Note z If the presser foot has been lowered and the shutter is closed, the machine cannot be threaded. Be sure to raise the presser foot and open the shutter before threading the machine. In addition, before removing the upper thread, be sure to raise the presser foot and open the shutter. z This machine is equipped with a window that allows you to check the position of the take-up lever. Look through this window and check that the thread is correctly fed through the take-up lever. 1 a Thread guide plate While using your right hand to lightly hold the j thread passed under the thread guide plate, pass the thread through the thread path in the order shown below. Pass the thread behind the needle bar thread k guide. The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand, as shown. 1 1 a Shutter a Needle bar thread guide Next, use the needle threader to thread the needle. Continue with the procedure in "Threading the needle" (page 31). 30