Home » Canon Manuals » Video Cameras » Canon CR-N500 » Manual Viewer

Canon CR-N500 Remote Camera Settings Guide - Page 107

Server, Interface, XC Canon's original, RTSP/RTP, NDI|HX, Standard

Add to My Manuals
Save this manual to your list of manuals

Page 107 highlights

 Server Video Output Format Protocol Preset SDI HDMI IP 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit) 1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) - Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) - When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. 3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit) 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit) 1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) - Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) - When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. 3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) - If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected. - A frame rate that exceeds the frame frequency cannot be selected. - JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected) Resolution: 1280 x 720 When frame frequency is 59.94/50.00 Hz: 14.99 fps When frame frequency is 23.98 Hz: 11.99 fps When frame frequency is 29.97/25.00 Hz: 12.50 fps XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP) Number of presets: Max. 100 (including home position)  Interface Communication Control Network Terminal 3G-SDI OUT Terminal GEN-LOCK Terminal HDMI OUT Terminal RS-422 Terminal INPUT 1/INPUT 2 Terminals MIC Terminal LAN, Wi-Fi, Serial, IR LAN x 1, RJ45, 1000Base-T BNC jack (output only) x 1, 0.8 Vp-p/75 , unbalanced SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant Embedded audio, Time code (VITC/LTC) BNC jack x 1, 1.0 Vp-p/75 , input only HDMI connector x 1, output only RJ45 connector x 1 INPUT (3-pin jack) (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced Sensitivity (MIC): -60 dBu (Manual volume center, full scale -18 dB)/600 /Att.: 20 dB Sensitivity (LINE): +4 dBu (Manual volume center, full scale -18 dB)/1 k or more Supply Voltage: 48 V DC (Bias resistance: 6.8 k) Ø3.5 mm stereo mini jack (unbalanced, plug-in power supported) Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 k or more/Att.: 20 dB Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 k or more Supply Voltage: 2.4 V DC (Bias resistance: 2.2 k) 107

Section	Page
Introduction	2
Trademarks	2
Software License Agreement	2
Third Party Software	2
User Manuals	5
Types of User Manuals	5
How to Use This Document	5
Chapter 1 Before Use	11
Examples of System Configuration	12
Related Software	15
Camera Search Tool	15
Remote Camera Control Application	15
Security Checking/Settings	16
Checking the Firewall Settings	16
Initial Camera Settings	17
Settings using the Camera Search Tool	17
Camera's Settings Page from the Web Browser	19
Chapter 2 Camera Setup	20
Overview	21
Accessing from a Web Browser	21
Configuration of the Settings Page	23
Camera Operation	25
Operation by Clicking on the Video Display Area or by Slider	25
Exposure Settings	27
WB/Color Settings	31
Image Quality Settings	33
Image Quality Details Settings	35
Focus Settings (CR-N500)	37
Autofocus	37
Manual Focus	40
Focus Settings (CR-N300)	42
Autofocus	42
Manual Focus	44
PTZ/IS Settings	45
Preset Settings	46
Registering Presets	46
Calling Presets	47
Deleting Presets	47
System Settings	48
Screen Configuration	48
Setting Items	49
Common Operations	49
[System] > [Video and Audio] > [HDMI/SDI]	51
HDMI/SDI	51
SDI	51
[System] > [Video and Audio] > [IP Streaming Video]	52
Mainstream	52
Substream 1	53
Substream 2	53
[System] > [Video and Audio] > [Audio]	54
General Audio	54
IP Audio Streaming	55
[System] > [Server] > [HTTP/Video]	56
HTTP Server	56
Video Server	56
[System] > [Server] > [RTP]	57
RTP Server	57
Audio Settings	57
RTP Mainstream, RTP Substream 1, RTP Substream 2	58
[System] > [Communication] > [Network]	59
LAN	59
IPv4	59
IPv6	60
DNS	60
mDNS	61
[System] > [Communication] > [Wireless LAN]	62
Interface	62
Access Point	62
IPv4	62
[System] > [Communication] > [External Connection (IP)]	64
Standard Communication (IP)	64
NDI\|HX	64
RTMP	65
[System] > [Communication] > [External Connection (Serial)]	66
Serial Port	66
Standard Communication (Serial)	67
[System] > [Security] > [Certificate Management]	68
Server Certificate Management	68
Create Certificate	68
[System] > [Security] > [SSL/TLS]	69
Encrypted Communications	69
Server Certificate	69
[System] > [Security] > [User Management]	70
Administrator Account	71
Authorized User Account	71
User Authority	71
[System] > [Security] > [Host Access Restrictions]	72
IPv4 Host Access Restrictions	72
IPv6 Host Access Restrictions	72
[System] > [System] > [Camera]	74
Camera Name	74
Installation Conditions	74
Tally Lamp	74
IR Remote Controller	75
Genlock	75
[System] > [System] > [Date and Time]	76
Current Date and Time	76
Settings	76
[System] > [System] > [Environment]	78
Environment	78
[System] > [System] > [Language]	79
Language	79
[System] > [Maintenance] > [General]	80
Device Information	80
Tool	80
Initialization	80
[System] > [Maintenance] > [Backup/Restore]	82
Backup/Restore	82
[System] > [Maintenance] > [Update Firmware]	83
Device Information	83
Update Firmware	83
[System] > [Maintenance] > [Log]	84
View Logs	84
Chapter 3 IR Remote Controller	85
Names and Functions of Parts	86
Handling the Remote Controller	88
Chapter 4 Appendix	89
USB Camera Functions (CR-N300)	90
Image Adjustment/Camera Control Functions	90
Troubleshooting	91
List of Log Messages	93
Log Messages on the Camera	93
Error Log	93
Warning log	95
Notification log	96
Restoring to the Factory Default Settings	100
Restoring to the Initial Settings from a Web Browser	100
Restoring to the Factory Default Settings with the RESET Switch on the Camera	100
List of Factory Default Settings	102
Routine Maintenance	105
Cleaning the External Surface	105
Cleaning the Lens	105
Specifications	106
CR-N500 Main Unit	106
CR-N300 Main Unit	108
Accessories	110
Operating Environment	110
Security Measures	112
Basic Measure 1: Setting Administrator Name and Password	113
Basic Measure 2: Using the Latest Firmware	113
Basic Measure 3: Setting Date and Time	113
Basic Measure 4: Monitoring the Log	113
Measures Suitable to the Users' Environment 1: User Management	114
Measures Suitable to the Users' Environment 2: Host Access Restrictions	114
Measures Suitable to the Users' Environment 3: Setting to the Digest Authentication	114
Measures Suitable to the Users' Environment 4: Changing the Port Number	115
Measures Suitable to the Users' Environment 5: Encrypting Communication	115
Measures Suitable to the Users' Environment 6: Disabling Unused Functions	115
Precautions When Disposing the Camera	116
Encrypting Backup Information	116

Match case Limit results 1 per page

107



Server



Interface

Video Output Format

SDI

1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)

1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)

–

Same video format required for SDI and HDMI (cannot select different

formats for SDI and HDMI)

–

When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.

HDMI

3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit)

1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)

1280 x 720: 59.94P, 50.00P (4:2:2 10 bit)

–

Same video format required for SDI and HDMI (cannot select different

formats for SDI and HDMI)

–

When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI.

3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)

1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)

1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)

640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)

–

If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format

cannot be selected.

–

A frame rate that exceeds the frame frequency cannot be selected.

–

JPEG has one pattern fixed depending on the frame frequency (format is

fixed and cannot be selected)

Resolution: 1280 x 720

When frame frequency is 59.94/50.00 Hz: 14.99 fps

When frame frequency is 23.98 Hz: 11.99 fps

When frame frequency is 29.97/25.00 Hz: 12.50 fps

Protocol

XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard

Communication (Serial), Standard Communication (IP)

Preset

Number of presets: Max. 100 (including home position)

Communication Control

LAN, Wi-Fi, Serial, IR

Network Terminal

LAN x 1, RJ45, 1000Base-T

3G-SDI OUT Terminal

BNC jack (output only) x 1, 0.8 Vp-p/75



, unbalanced

SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant

Embedded audio, Time code (VITC/LTC)

GEN-LOCK Terminal

BNC jack x 1, 1.0 Vp-p/75



, input only

HDMI OUT Terminal

HDMI connector x 1, output only

RS-422 Terminal

RJ45 connector x 1

INPUT 1/INPUT 2 Terminals

INPUT (3-pin jack) (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced

Sensitivity (MIC): -60 dBu (Manual volume center, full scale -18 dB)/600



/Att.:

20 dB

Sensitivity (LINE): +4 dBu (Manual volume center, full scale -18 dB)/1 k



Supply Voltage: 48 V DC (Bias resistance: 6.8 k



)

MIC Terminal

Ø3.5 mm stereo mini jack (unbalanced, plug-in power supported)

Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 k



more/Att.: 20 dB

Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 k



Supply Voltage: 2.4 V DC (Bias resistance: 2.2 k



)