Canon CR-N500 Remote Camera Settings Guide - Page 53
Substream 1, Framerate fps], [Bit Rate Control], [Target Bit Rate Mbps]
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
[Bit Rate Control] Settings for the video bit rate. In order to control the bit rate strictly in an environment subject to limitations such as the bandwidth, set to [CBR]. [Target Bit Rate (Mbps)] Enter the target value of the bit rate when [Bit Rate Control] is set to [CBR]. Enter a bit rate as an image quality target when [Bit Rate Control] is set to [VBR]. Depending on the video, the set bit rate may be exceeded. The maximum value that can be entered differs depending on the settings of [Video Size] and [Framerate (fps)]. [I Frame Interval (sec.)] Select the interval in seconds to insert an I frame into the video selected in [Video Codec]. Specify [ALL-I] if wanting all frames to be I-frames. Note When [Video Codec] is set to [H.265], [ALL-I] cannot be set. Substream 1 Settings for the video of Substream 1 to be distributed from the camera. [Video Codec] H. 264 is fixed. [Video Size] 640 x 360 is fixed. [Framerate (fps)], [Bit Rate Control], [Target Bit Rate (Mbps)], [I Frame Interval (sec.)] Refer to each item of [Mainstream]. Note [Framerate (fps)] of Substream 1 cannot be set to [59.94] or [50.00]. Substream 2 Settings for the video of Substream 2 to be distributed from the camera. [Video Codec] JPEG is fixed. [Video Size] 1280 x 720 is fixed. [Framerate (fps)] The set value is displayed according to the frame frequency. 53