Canon CR-N500 Remote Camera Settings Guide - Page 83
[System] > [Maintenance] > [Update Firmware], Device Information, Update Firmware
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
[System] > [Maintenance] > [Update Firmware] Perform firmware update. Device Information [Model Name], [Firmware Version] Camera information is displayed. Update Firmware Performs firmware update. Important Do not turn off the power to the camera while performing [Update Firmware]. Turning off the camera at this stage may result in disabling its ability to boot correctly. [Restore Default Settings] Updating the firmware restores to the default settings. If set to [Restore], everything is restored except the following settings. • Network Settings • NTP Server • HTTP Server • Host Access Restrictions • Time Zone • Certificates • SSL/TLS • Administrator Name • Administrator Password Note Even if the [Restore Default Settings] is set to [Do not restore], the [Wireless LAN] setting will be restored. [Update Firmware] Click [...] to select the firmware file for updating and click [Execute]. When a confirmation message is displayed. click [OK] to start Update Firmware. During update, the camera's front STATUS lamp will blink. After update firmware is performed, the camera will be rebooted. 83