Canon CR-N500 Remote Camera Settings Guide - Page 51

[System] > [Video and Audio] > [HDMI/SDI], HDMI/SDI, SDI

Page 51 highlights

[System] > [Video and Audio] > [HDMI/SDI] Settings for the output signal format of the HDMI and SDI terminals. HDMI/SDI Common settings for the video output signal format for HDMI/SDI. [Video Output Configuration] The video output format is set as a combination of the video size and frame rate. The selectable HDMI/SDI video output format varies depending on the [Frame Frequency (Hz)] set in [System] > [System] > [Environment]. [Frame Frequency (Hz)] 23.98 29.97 59.94 25.00 50.00 HDMI/SDI video output format (video size/frame rate) 1920x1080/23.98P, 3840x2160/23.98P 1920x1080/29.97P, 3840x2160/29.97P 1280x720/59.94P, 1920x1080/59.94P, 1920x1080/59.94i 1920x1080/25.00P, 3840x2160/25.00P 1920x720/50.00P, 1920x1080/50.00P, 1920x1080/50.00i The settings and options for each video stream vary depending on the selected video output format. See [System] > [Video and Audio] > [IP Streaming Video] for more information. Note SDI output is not available when the video size is 3840 x 2160. SDI Settings for the output signal method of the SDI terminals. [3G-SDI Mapping] Select the mapping method of the output signal of the SDI terminal. A signal conforming to Level A or Level B of the SMPTE ST 425-1 standard is outputted. 51

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119

51
Settings for the output signal format of the HDMI and SDI terminals.
HDMI/SDI
Common settings for the video output signal format for HDMI/SDI.
[Video Output Configuration]
The video output format is set as a combination of the video size and frame rate.
The selectable HDMI/SDI video output format varies depending on the [Frame Frequency (Hz)] set in [System] > [System]
> [Environment].
The settings and options for each video stream vary depending on the selected video output format. See [System] > [Video
and Audio] > [IP Streaming Video] for more information.
Note
SDI output is not available when the video size is 3840 x 2160.
SDI
Settings for the output signal method of the SDI terminals.
[3G-
S
DI Mapping]
Select the mapping method of the output signal of the SDI terminal. A signal conforming to Level A or Level B of the SMPTE
ST 425-1 standard is outputted.
[System] > [Video and Audio] > [HDMI/SDI]
[Frame Frequency (Hz)]
HDMI/
S
DI video output format (video size/frame rate)
23.98
1920x1080/23.98P, 3840x2160/23.98P
29.97
1920x1080/29.97P, 3840x2160/29.97P
59.94
1280x720/59.94P, 1920x1080/59.94P, 1920x1080/59.94i
25.00
1920x1080/25.00P, 3840x2160/25.00P
50.00
1920x720/50.00P, 1920x1080/50.00P, 1920x1080/50.00i