Canon CR-N500 Remote Camera Settings Guide - Page 47
Calling Presets, Confirm in the video display area.
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4 Repeat steps 2 to 3 to register multiple presets. Note • [home] is the setting when the camera was launched (home position). It can be overwritten but cannot be deleted. • Able to register up to 100 presets (including home position) in the camera. Calling Presets Select the preset to call from the list and click [View] to reflect the preset settings on the camera. Confirm in the video display area. The time or speed at which the camera moves to the pan/tilt/zoom position can be specified in the [Speed Mode]. Click [Time] or [Speed Level] and adjust the value with the slider, and then click [View]. Note • If the pan/tilt/zoom or focus of the camera is operated while a preset is running, the preset stops. However, another preset can be called while a preset is running. • If [Stop] is clicked while a preset is running on a camera, the preset stops. • Depending on the relationship between the pan/tilt/zoom position before the call and the registered pan/tilt/zoom position, and the [Time] setting, it may not operate within the set time. • Camera settings other than the pan/tilt/zoom position are reflected immediately when [View] is clicked. Deleting Presets Select the preset to delete from the list and click [Delete] to delete it from the camera. 47