Canon CR-N500 Remote Camera Settings Guide - Page 80
[System] > [Maintenance] > [General], Device Information, Tool, Initialization
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
[System] > [Maintenance] > [General] Check camera information such as the firmware version, and perform maintenance on the camera system. Device Information [Model Name], [Firmware Version], [Serial Number], [Build Number], [MAC Address (Wired LAN)], [MAC Address (Wireless LAN)] Displays information about the camera. Tool Displays license, initialization of the Pan/Tilt settings, and rebooting the camera. [See Third Party Software License Conditions] Third party software license information is displayed as a list. [Pan/Tilt Initialization] If the Pan/Tilt position shifts, click [Execute] to initialize the position. [Reboot] Reboots the camera. Initialization Initialize the camera. Important • Do not turn off the power to the camera while performing [Restore Default Settings]. Turning off the camera at this stage may result in disabling its ability to boot correctly. • Once [OK] is clicked, the process of restoring the default settings cannot be interrupted. 80