Canon CR-N500 Remote Camera Settings Guide - Page 109
XC Canon's original, RTSP/RTP, NDI|HX, Standard, x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Server Video Output Format Protocol Preset SDI HDMI IP USB 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit) 1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) - Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) - When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. 3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit) 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit) 1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) - Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) - When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. 3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) - If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected. - A frame rate that exceeds the frame frequency cannot be selected. - JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected) Resolution: 1280 x 720 When frame frequency is 59.94/50.00 Hz: 14.99 fps When frame frequency is 23.98 Hz: 11.99 fps When frame frequency is 29.97/25.00 Hz: 12.50 fps Motion JPEG: 1920 x 1080, 1280 x 720, 640 x 360 59.94 Hz: 12.00 fps, 5.00 fps 50.00 Hz: 12.50 fps, 5.00 fps XC (Canon's original), RTSP/RTP, NDI|HX, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP) Number of presets: Max. 100 (including home position) Interface Communication Control Network Terminal 3G-SDI OUT Terminal HDMI OUT Terminal RS-422 Terminal MIC Terminal USB Terminal LAN, Wi-Fi, Serial, IR, USB LAN x 1, RJ45, 1000Base-T BNC jack (output only) x 1, 0.8 Vp-p/75 , unbalanced SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant Embedded audio, Time code (VITC/LTC) HDMI connector x 1, output only RJ45 connector x 1 Ø3.5 mm stereo mini jack (unbalanced, plug-in power supported) Sensitivity (MIC): -72 dBV (Manual volume center, full scale -18 dB)/1 k or more/Att.: 20 dB Sensitivity (LINE): -10 dBV (Manual volume center, full scale -18 dB)/1 k or more Supply Voltage: 2.4 V DC (Bias resistance: 2.2 k) Type-C (USB 3.0) x 1 109