Canon CR-N500 Remote Camera Settings Guide - Page 45
PTZ/IS Settings
View all Canon CR-N500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
PTZ/IS Settings Settings for the camera's pan, tilt, and zoom operations and image stabilizer. [Digital Zoom] Select whether to use a digital zoom (300x N500 , 400x N300 ), or a Digital Tele-Converter. [Digital Tele-Converter] When [Digital Zoom] is set to [Digital Tele-Converter], select the magnification of the focal length. Because the image is processed digitally, the video is coarser over the entire zoom range. [Pan/Tilt Acceleration] Select the degree of acceleration of the pan/tilt operation. [Image Stabilizer] Select whether to use a function that reduces the blurring of videos caused by camera vibration. [Standard] corrects relatively small blurs. [Powered IS] corrects blurring during telephoto shooting. The closer the zoom is to the telephoto side, the greater the correction effect. It is not suitable for pan or tilt. Note • If the blurring is too large, it may not be corrected completely. • For pan and tilt, the anti-vibration effect is smaller than compared to when not operating. • Swing back may occur when the pan/tilt stops. [Soft Zoom Control] N300 Slowly accelerates when zooming starts and decelerates when zooming stops. 45