Canon PIXMA iP6220D iP6220D Direct Printing Guide - Page 65

Cannot See the Display Properly on the LCD/Cannot See the Display

Get Canon PIXMA iP6220D PDF manuals and user guides View all Canon PIXMA iP6220D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 65 highlights

Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD Possible Cause Cannot see the display properly on the LCD/The display on the LCD is illegible Cannot see the display on the LCD Try This Adjust the contrast of the LCD in the Adjust contrast menu in the Maintenance/ settings. See "Changing the Other Settings" on page 30. The LCD may be in the sleep mode. Press the OK button to turn on the LCD again. * If you leave the printer more than five minutes without using any button on the operation panel, the LCD goes into the sleep mode automatically. Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White Streaks Possible Cause A FINE Cartridge is not seated properly/ A FINE Cartridge is empty Incorrect media type Print head nozzles clogged or shifted Media not loaded print-side up Try This • Open the front cover first and then press up the FINE Cartridge to install it properly. • Ensure that the specified FINE Cartridge is installed. If the specified FINE Cartridge is not used, good printing color quality cannot be expected. See "Replacing a FINE Cartridge" on page 54. On the operation panel, confirm that the media type selected matches the paper loaded. Print the nozzle check pattern to check for uneven ink output. When a specific color is missing from the nozzle check pattern, clean the print head. • If ink supply is uneven: See "Print Head Cleaning" on page 51. • If straight lines are shifted: See "Aligning Print Head - Auto head align" on page 53. Check that your paper is loaded with the correct print side facing up. Note Follow the instructions packaged with your specialty media for loading and handling. Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched Possible Cause Paper thickness lever position is not proper Try This Set the paper thickness lever to the left position. If the paper is scratched even when printing on plain paper, set the paper thickness lever to the right position. Return the paper thickness lever to the left after printing. 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
61
±
Cannot See the Display Properly on the LCD/Cannot See the Display
on the LCD
±
Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White
Streaks
±
Back of Paper is Smudged/Paper Does Not Feed Properly/Printed
Surface is Scratched
Possible Cause
Try This
Cannot see the display properly on the
LCD/The display on the LCD is illegible
Adjust the contrast of the LCD in the Adjust contrast
Adjust contrast
Adjust contrast
Adjust contrast menu in the Maintenance/
Maintenance/
Maintenance/
Maintenance/
settings
settings
settings
settings. See “Changing the Other Settings” on page 30.
Cannot see the display on the LCD
The LCD may be in the sleep mode.
Press the OK
OK
OK
OK button to turn on the LCD again.
* If you leave the printer more than five minutes without using any button on
the operation panel, the LCD goes into the sleep mode automatically.
Possible Cause
Try This
A FINE Cartridge is not seated properly/
A FINE Cartridge is empty
•
Open the front cover first and then press up the FINE Cartridge to install it properly.
•
Ensure that the specified FINE Cartridge is installed. If the specified FINE Cartridge is
not used, good printing color quality cannot be expected.
See “Replacing a FINE Cartridge” on page 54.
Incorrect media type
On the operation panel, confirm that the media type selected matches the paper
loaded.
Print head nozzles clogged or shifted
Print the nozzle check pattern to check for uneven ink output.
When a specific color is missing from the nozzle check pattern, clean the print head.
•
If ink supply is uneven: See “Print Head Cleaning” on page 51.
•
If straight lines are shifted: See “Aligning Print Head - Auto head align” on page 53.
Media not loaded print-side up
Check that your paper is loaded with the correct print side facing up.
Note
Follow the instructions packaged with your specialty media for loading and handling.
Possible Cause
Try This
Paper thickness lever position is not
proper
Set the paper thickness lever to the left position.
If the paper is scratched even when printing on plain paper, set the paper thickness
lever to the right position.
Return the paper thickness lever to the left after printing.