Canon PIXMA iP6220D iP6220D Direct Printing Guide - Page 70

Error message on camera, Try - waste ink

Get Canon PIXMA iP6220D PDF manuals and user guides View all Canon PIXMA iP6220D manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Error message on camera Try This No ink Printer error Hardware Error/No ink Possible causes are as follows: • The ink has run out. Replace the FINE Cartridge, and close the front cover. If lines are misaligned or the resulting output is not satisfactory, carry out the print head alignment. If printing is in progress and you want to continue printing, press the OK button on the printer. Then printing can continue under the ink out condition with the FINE Cartridge installed. Replace the empty FINE Cartridge immediately after the printing. The resulting print quality is not satisfactory, if printing is continued under the ink out condition. • Some FINE Cartridges are not installed in place. Install the FINE Cartridges in the appropriate positions. • The FINE Cartridge may not be the compatible with this printer. Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the print head alignment. • This FINE Cartridge has previously been used. • Ink may have run out. The function for detecting the remaining ink level will be disabled since the remaining ink level cannot be correctly detected. If you want to continue printing without this function, press the OK button. Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. An error requiring servicing might have occurred. (Printer POWER lamp and Alarm lamp flash alternately.) Disconnect the cable between the printer and the camera. Turn off the printer and unplug the power cord of the printer from the power supply. After a while, plug the power cord of the printer back in, turn on the printer, and then reconnect the camera to the printer. If the same problem occurs, contact the Customer Care Center. FINE Cartridge errors have occurred. Replace the FINE Cartridge. See "Replacing a FINE Cartridge" on page 54. *1To resume printing, you can press the OK button on the printer instead of selecting Continue. *2The waste ink absorber absorbs ink used during cleaning, for example. If this message appears, you will need to call for servicing to replace the absorber and to check the printer for proper operation. 66

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
66
*1
To resume printing, you can press the OK
OK
OK
OK button on the printer instead of selecting Continue
Continue
Continue
Continue.
*2
The waste ink absorber absorbs ink used during cleaning, for example. If this message
appears, you will need to call for servicing to replace the absorber and to check the printer for
proper operation.
No ink
Possible causes are as follows:
•
The ink has run out.
Replace the FINE Cartridge, and close the front cover.
If lines are misaligned or the resulting output is not satisfactory, carry out the print
head alignment.
If printing is in progress and you want to continue printing, press the OK
OK
OK
OK button on
the printer. Then printing can continue under the ink out condition with the FINE
Cartridge installed. Replace the empty FINE Cartridge immediately after the printing.
The resulting print quality is not satisfactory, if printing is continued under the ink
out condition.
•
Some FINE Cartridges are not installed in place. Install the FINE Cartridges in
the appropriate positions.
•
The FINE Cartridge may not be the compatible with this printer. Install
the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not
satisfactory, carry out the print head alignment.
•
This FINE Cartridge has previously been used.
•
Ink may have run out.
The function for detecting the remaining ink level will be disabled since
the remaining ink level cannot be correctly detected. If you want to continue printing
without this function, press the OK
OK
OK
OK button.
Canon recommends to use new genuine Canon cartridges in order to obtain
optimum qualities.
Printer error
An error requiring servicing might have occurred. (Printer POWER
POWER
POWER
POWER lamp and Alarm
Alarm
Alarm
Alarm lamp
flash alternately.)
Disconnect the cable between the printer and the camera. Turn off the printer and
unplug the power cord of the printer from the power supply. After a while, plug
the power cord of the printer back in, turn on the printer, and then reconnect
the camera to the printer.
If the same problem occurs, contact the Customer Care Center.
Hardware Error/No ink
FINE Cartridge errors have occurred. Replace the FINE Cartridge.
See “Replacing a FINE Cartridge” on page 54.
Error message on camera
Try This