Canon XF305 XF305 / XF300 Instruction Manual - Page 106
Frame Recording Mode
View all Canon XF305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
3 Recording Special Recording Modes [J Other Functions] [Frame Rec] [Rec Frames] [1] [J Other Functions] [Special Rec] [Off] Frame Recording Mode Set the number of frames in advance. We recommend using the wireless controller or stabilizing the camcorder, for example, on a tripod. Sound is not recorded in this mode. Configuring Frame Recording Mode 1 Open the [Rec Frames] submenu. [J Other Functions] [Frame Rec] [Rec Frames] 2 Select the desired number of frames and then press SET. • Available options are 1, 3, 6 and 9 (2, 6 and 12 if [J Other Functions] [Frame Rate] is set to [24P] or [60P]). Activating Frame Recording Mode and Recording 1 Open the [Special Rec] submenu. [J Other Functions] [Special Rec] 2 Select [Frame Rec] and then press SET. • [FRM STBY] appears at the top of the screen (with [FRM] flashing). 3 Press the START/STOP button to begin recording. • The camcorder automatically records the set number of frames. • The tally lamps illuminate. • [FRM STBY] changes to [N FRM REC] while recording frames and [N FRM STBY] when frames are not being recorded. • Repeat until you finish recording. 4 Open the [Special Rec] submenu. [J Other Functions] [Special Rec] 5 Select [Off] and then press SET. • Frame recording mode ends and all of the recorded frames are joined together into one clip. • The tally lamps go out and [STBY] appears at the top of the screen. NOTES • You can use only one special recording mode at a time. • While recording, you cannot change the number of frames. • Some frames at the point the recording was stopped may be recorded and added to the end of the clip. • Frame recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the [J Other Functions] [Bit Rate/Resolution] or [Frame Rate] setting. 106