Canon XF305 XF305 / XF300 Instruction Manual - Page 62
Open the [Image Stabilizer] submenu., Select the desired option and then press SET.
View all Canon XF305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
3 Recording Image Stabilizer Image Stabilizer [l Camera Setup] [Image Stabilizer] [Standard] Use the image stabilizer to compensate for camcorder shake in order to achieve steadier shots. There are 3 methods of image stabilization; select the method that best suits your needs. Operating modes: 1 Open the [Image Stabilizer] submenu. [l Camera Setup] [Image Stabilizer] 2 Select the desired option and then press SET. • The icon of the selected mode appears on the bottom of the screen. Options [Powered] Q: [Dynamic] P: [Standard] O: [Off]: Powered IS is most effective when you are stationary and zooming in on far subjects using high zoom ratios (the more you approach the telephoto end). This mode is not suitable for tilting and panning shots. Dynamic IS compensates for a higher degree of camcorder shake, such as when shooting while walking, and is more effective as the zoom approaches full wide angle. Standard IS compensates for a lower degree of camcorder shake, such as when shooting while remaining stationary, and is suitable for shooting natural-looking scenes. Use this setting when the camcorder is mounted on a tripod. NOTES • By default, assignable button 1 is set to [Standard] but you can also set it for another assignable button instead. You can press the button to activate standard IS. • If you set an assignable button to [Dynamic IS] or [Powered IS] (0 111), you can press the button to turn the assigned mode on or off. • If the degree of camcorder shake is too high, the image stabilizer may not be able to fully compensate. • When you are using [Dynamic] mode, the edges of the picture may be adversely affected (such as ghosting, artifacts and dark areas) when compensating for a high degree of camcorder shake. 62