Canon XF305 XF305 / XF300 Instruction Manual - Page 80

3 Recording Zooming Approximate zoom speeds (handle zoom rocker) [Handle Rocker H]/[Handle Rocker L] setting [1] (slowest) [16] (fastest) [Slow] 5 min. 4.5 sec. [Speed Level] setting [Normal] 3 min. 2.5 sec. [Fast] 1 min. 1.8 sec.* * When the zoom speed is too fast (less than 2 seconds end-to-end), the camcorder will have more trouble focusing automatically while zooming. [l Camera Setup] [Zoom] [Speed Level] [Normal] [l Camera Setup] [Zoom] [Wireless Controller] Using the Wireless Controller or Optional Remote Control The zoom speeds when using the wireless controller and when using an optional or commercially available remote control connected to the REMOTE terminal are different. When using the wireless controller, you must press the record enable button and desired zoom button simultaneously to zoom. Setting the Zoom Speed Perform the following procedure to set the zoom speed for the supplied wireless controller. Refer to the following table for a summary of zoom speeds when using the wireless controller or other remote controls. 1 Open the zoom [Speed Level] submenu. [l Camera Setup] [Zoom] [Speed Level] 2 Select [Fast], [Normal] or [Slow] and then press SET. 3 Open the zoom [Wireless Controller] submenu. [l Camera Setup] [Zoom] [Wireless Controller] 4 Select the desired level and then press SET. • This setting affects both the wireless controller and optional remote controls. Zoom speeds (wireless controller and optional remote controls) Accessory Zoom speed Wireless controller (supplied) Constant zoom speed that is selected from the menu. Remote control without variable zoom speed control (commercially available) Constant zoom speed. Remote control with variable zoom speed control (optional ZR-2000 or ZR-1000 Zoom Remote Controller, etc.) Based on zoom speed setting. NOTES • Attaching the optional WA-H82 Wide Attachment decreases the camcorder's focal length by a factor of 0.8. However, the zoom ratio at the telephoto end will be approximately 4x. When you use the wide attachment, set [l Camera Setup] [Wide Attach. Lens] to [WA-H82]. This will set the image stabilization to suit the wide attachment. Also, the AF mode will be set to Normal AF. 80