Canon XF305 XF305 / XF300 Instruction Manual - Page 43
Checking the Available Recording Time, Recovering Data on the CF Card - slow motion
View all Canon XF305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Preparing Recording Media Preparations 2 NOTES • If both CF card slots contain a CF card and you open the cover of the selected slot, the camcorder will automatically switch to the other slot. • You cannot use the SLOT SELECT button to switch between CF card slots while recording. • When the bit rate is set to 50 Mbps (0 53) during slow motion recording, relay recording is not available. Checking the Available Recording Time When the camcorder is in mode, the screen indicates which CF card slot is in use and the available recording time (in minutes*) that remains on each CF card. When the camcorder is in mode, the side panel indicates the available recording time. On the [Media] status screen (0 178), you can check the available recording time, total space and used space of each recording media, and the available number of photos. * The approximate available recording time is based on the current bit rate (0 53). Recovering Data on the CF Card An error may occur with data on the CF card in cases such as turning off the camcorder while recording or removing the CF card while recording. In such case, you may be able to recover the data on the CF card. Operating modes: 1 Insert the CF card with the data to be recovered into the camcorder. 2 When the screen prompts you to recover the data, select [Yes] and then press SET. NOTES • This procedure will delete clips shorter than 10 seconds in length. Additionally, up to 10 seconds will be deleted from the end of clips on the CF card. • In some cases, data may not be recovered, such as when the FAT32 file system is corrupted or the CF card is physically damaged. • While you are recording, you can recover data on the CF card that is not being recorded to. 43