Canon imageFORMULA DR-G2110 User Manual - Page 116
Place the new feed roller on the pin., completely closed by pushing until you hear a click.
View all Canon imageFORMULA DR-G2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
6 Place the new feed roller on the pin. 8 Push the roller lock lever up to lock the feed roller. 7 Put the feed roller in place (1), and align the notch in the roller's axle with the shaft on the scanner (2). (2) 9 Close the roller cover. Make sure that the front unit is completely closed by pushing until you hear a click. (1) IMPORTANT Failure to firmly close the roller cover may cause a feed error. Always be sure to check that the roller cover is closed. 116
116
6
Place the new feed roller on the pin.
7
Put the feed roller in place (1), and align the notch in the
roller’s axle with the shaft on the scanner (2).
8
Push the roller lock lever up to lock the feed roller.
9
Close the roller cover. Make sure that the front unit is
completely closed by pushing until you hear a click.
IMPORTANT
Failure to firmly close the roller cover may cause a feed error.
Always be sure to check that the roller cover is closed.
(1)
(2)