Canon imageFORMULA DR-G2110 User Manual - Page 132
All of the placed documents have been scanned, but, the scanned image does not appear on
View all Canon imageFORMULA DR-G2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Problem 16 Scanner does not feed document (or document has stopped in the feeding path). Solutions (1) If the continuous manual feeding mode is enabled, documents may not feed correctly. Disable the continuous manual feeding mode. "Continuous manual feeding mode" (See p. 45) (2) Check that the roller is installed correctly. Clean the roller if necessary. Problem 17 Multiple pages of scanned images cannot be saved to a single file. Solutions Depending on the file format, multiple scanned image pages cannot be saved as a single file with CaptureOnTouch. File type BMP, JPEG PPTX TIFF, PDF Processing for multiple pages Scanned images are always saved one page per file. Multi-page images are always saved to a single file. You can save multiple pages to a single file by clicking and selecting [Create 1 file for pages of a document] in the displayed dialog box. Problem 18 All of the placed documents have been scanned, but the scanned image does not appear on the application. Solutions When [Panel-Feeding] or [Automatic Feeding] is selected as the feeding method on the scanner driver's Detail Settings screen, a scanning operation will not continue after all of the documents are fed, as the scanner awaits additional documents to be fed. Pressing the Stop key on the operation panel terminates the scanning operation. Problem 19 Memory becomes insufficient and scanning stops. Solutions If you configure scanning conditions that use a large amount of the computer's memory, scanning may stop because of insufficient memory. Although this depends on the computer's memory size, the possibility of insufficient memory increases if any of the following scanning conditions overlap. • [Color Mode] is set to [24-bit Color] • A large page size is specified as the [Page Size]. Alternatively, the page size is set to [Scanner's Maximum]. • A high resolution (600dpi etc.) is specified for [Dots per inch]. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through/Remove Background] if they are set to on. 132