Canon imageFORMULA DR-G2110 User Manual - Page 128
Head Cleaning, keys to select [Head Cleaning], and press
View all Canon imageFORMULA DR-G2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
3 Press the ▲▼ keys to select [Imprint Test], and press [OK]. The imprinter test settings are displayed. 4 Press the ▲▼ keys to select [Start], and press [OK]. Test printing of the installed imprinter is executed. IMPORTANT If no paper is loaded for test printing, the imprinter test finishes without printing. 5 Press the Menu key to return to the original screen. Head Cleaning If lines or streaks appear in the imprinter printout, the printhead nozzle may be clogged. This can be corrected by performing head cleaning. IMPORTANT • After head cleaning, run the imprinter test to check printing. (See p. 127) • If head cleaning does not improve printing, remove the printhead and clean the ink cartridge. (See p. 126) Head Cleaning 1 Press the Menu key on the operation panel. User Mode is activated. "User Mode Operations" (See p. 60) 2 Press the ▲▼ keys to select [Imprint Test], and press [OK]. The imprinter test settings are displayed. 3 Press the ▲▼ keys to select [Head Cleaning], and press [OK]. 4 Press the ▲▼ keys to select [Start], and press [OK]. Head cleaning executes and finishes. 5 Press the Menu key to return to the original screen. 128