Canon imageFORMULA DR-G2110 User Manual - Page 20
Power Supply, Moving the Scanner, Handling, WARNING
View all Canon imageFORMULA DR-G2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Power Supply ● Connect only to a power outlet of the rated voltage and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz depending on your region). ● Do not use the scanner with a power supply that is not rated for the specified voltage. Doing so might cause a fire or electric shock. ● Do not connect other electrical equipment to the same power outlet to which the scanner is connected. Also, when using an extension cord, make sure that the extension cord is rated for the current requirements of the scanner. ● The power cord may be damaged if frequently stepped on or if heavy objects are placed on it. ● Do not use the power cord while it is coiled. ● Do not pull directly on the power cord. When disconnecting the power cord, grasp the plug and remove it from the outlet. ● Keep the area around the power cord clear of objects so that the power cord can be disconnected easily in an emergency. ● If you have any questions regarding the power supply, contact your local authorized Canon dealer or service representative for further information. Moving the Scanner ● The scanner weights about 25.0 kg (55.1 lbs). To lift or move the scanner, always use two people, one on each side. Never attempt to lift the scanner by yourself. You could drop the scanner or pinch your fingers, resulting in personal injury or damage to the scanner. Remember to be extra careful when moving it. ● Make sure to disconnect the interface cable and power cord when moving the scanner. If the scanner is carried with these items connected, the plugs and connectors may be damaged or cause the scanner to fall and result in personal injury or damage to the scanner. Handling WARNING Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock. ● Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner. ● Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, and do not pull or excessively bend the power cord. 20