Canon imageFORMULA DR-G2110 User Manual - Page 133
To set from User Mode, increase the [Feed Interval]., set [Separation Force]
View all Canon imageFORMULA DR-G2110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Problem 20 Multifeeding when scanning multiple bound pages. Solutions Place the bound edge against the feed inlet and scan by manual feeding. Problem 21 Barcode detection fails. Solutions Barcode detection may fail depending on the brightness of the image. Adjust the [Brightness] setting on the [Brightness] tab sheet of the scanner driver's setting screen. Alternatively, enable [Prevent Bleed Through / Remove Background] on the [Image control] tab sheet. Alternatively, increase the [Dots per inch] setting on the [Basic] tab sheet. Problem 22 Ejected documents are misaligned. Solutions (1) Raise the Document Eject Stopper to stop ejected documents from spilling. (See p. 43) (2) Lengthening the paper feed interval can make it easier to keep ejected documents aligned. Open the scanner driver's settings screen, and on the [Feeding] tab sheet, click the [Advanced setting] button and increase the [Feed interval setting]. (See p. 26) To set from User Mode, increase the [Feed Interval]. "User Mode Operations" (See p. 60) (3) Depending on document thickness and condition, extra time may be needed for documents to fall into the eject tray, causing them to be pushed out by subsequent ejected documents. In this case, open the scanner driver's settings screen and on the [Feeding] tab sheet, select [Extra-thin paper] for the [Document type]. To set from User Mode, set [Separation Force] to [Thin Paper Mode]. "User Mode Operations" (See p. 60) 133