Casio QT 6600 Reference Manual - Page 101

3-3-10. System re-configuration This command is one procedure of down recovery. It backs the contents of the system connection table to the original value. It should be executed under these conditions: 1) After issuing "Open check report". 2) All terminals are connected and work without any trouble. (Check by system connection check) 3) No terminal is in registration, collection, consolidation, sending/receiving programs. 4) Activate "System re-configuration" command at the terminal on which the "Cut-off" icon is lit. MGR C01 10-10-01 12:34 000000 Manager Mode 3.Remote off ↑ 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change 9.Error Log Print 10.System Re-configuration ↓ 0.00 ß Cut-off Master or Backup master icon 1. Sign on a clerk (if necessary). 2. Press and to assign manager mode. 3. Select "10. System Re-configuration" and press the key. System Re-configuration System Re-configuration NO OK? YES 4. Choose the option "YES (Perform system re-configuration) 0.00 / NO (Abort this procedure)" and press the key. ß * Perform "System Recofiguration" operation at the terminal that shows system error icon ¶. QT-6600 Reference Manual R-101