Casio QT 6600 Reference Manual - Page 87

2-15. Magnetic card reading QT-6600 has the following capability by swiping magnetic card. 1. Customer number entry *1 You can enter customer number, by swiping magnetic card. → key Card swipe • Customer number should be programmed in the customer file. • Site No. in the mag stripe equals to the programmed value. • Use Track-1 2. Create dummy check *1 Card swiping activates table transfer. • Read the customer name from the magnetic card and store it to the check index memory. • In case of using this feature, program "transfer table by card swiping" (D10 of the address 26 of the general control program) • Use Track-1 3. Clerk sign on *1 Card swiping activates clerk sign on. (effective during signing off only) • In case of using this feature, the lower 4 digit in the mag stripe should be set to the clerk number. • Use Track-2 (If track-2 cannot read, use track-1.) 4. Enter REG 2 mode *1 Cashier/ clerk can enter the REG 2 mode, by swiping card. key → → key Card swipe • In case of using this feature, the lower 4 digit in the mag stripe is treated as manager's secret number. • Use Track-2 (If track-2 cannot read, use track-1.) 5. Loyalty card This function is used to register the key strings such as customer discount etc., by swiping magnetic card (and scanning OBR code). After swiping a card (track-2)/ scanning a code, the designated function in the transaction key file is executed. Procedure • Using swiping: → key Card swipe *1 *2 key should be allocated in the transaction key file. If there is no key on the keyboard, program D7 and D6 of the address 24 of the general control program to designate the default key. Card swipe *2 • Using scanning: → key Code scanning *1*2 Pressing key is mandatory. After swiping/ scanning card, the following subjects are performed. 1. Check card expiry (In case of programming check to key.) 2. Card data check (Checked by D10 ~ D8 of key program and unit price field of key. 3. Transfer card data (D7 and D6 of key program) 4. Activate function (D5 ~ D1 of key program) *1 In case of setting "Swipe has NOT precedence." (D1 of the address 24 of the general control program) *2 In case of setting "Swipe has precedence." (D1 of the address 24 of the general control program) QT-6600 Reference Manual R-87