Casio QT 6600 Reference Manual - Page 90

Manager Operation 3. Manager operation This section describes manager operations (such as machine initialization, IPL, manager functions etc.) of QT-6600. 3-1. Machine initialization There are three different types of initialization such as INIT, FC, and INIT2. INIT; Machine initialization, all program and total data are reset. FC; Flag clear, all program and total data are remained, only the current transaction data are reset. INIT2; Machine initialization 2, all program data are remained, only total data are reset. The procedures of machine initialization are described in the chapter 1 of the programming manual. The required init code are listed below. Operation Init Flag clear Init2 Init code 00020000 00010000 00040000 00050000 00060000 00080000 No need 8888888888 Meaning for the U.S. for other area (default descriptors are initialized in English) for other area (default descriptors are initialized in German) for other area (default descriptors are initialized in French) for other area (default descriptors are initialized in Spanish) Arabic (default descriptors are initialized in English) * See the "INIT code" section to notice the detail information. 3-1-1. INIT Initialization process is as follows: Start Input Init code (see above) Hardware reset All RAM reset Inline ID definition File creation 1 Initialization operation Input date/time, ID etc. File creation 2 Revise terminal connection table Receiving program from other terminal or CF card Initialization result to E-journal End 3-1-2. Flag clear Flag clear process is as follows: Start Hardware reset Initialize work area/ buffers/flags Menu selection FC/Init2 R-90 Initialization result to E-journal Init 2 End