Casio QV-R41 Owners Manual - Page 68
Using the Macro Mode, Keep pressing, until the focus mode, indicator shows, Record the image.
![]() |
View all Casio QV-R41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
OTHER RECORDING FUNCTIONS 3. Use [̆] and [̄] to select the Auto Focus area you want, and then press [SET]. For this type of Auto Focus area: Very limited range in the center of the screen • This setting works well with focus lock (page 70). Automatic selection of the focus area where the subject closest to the camera is located • With this setting, a wide focus frame, which contains seven focus points, appears on the monitor screen first. When you press the shutter release button half way, the camera automatically selects the focus point where the subject closest to the camera is located, and a focus frame appears at that point. • This setting works well for group photos. Select this: Spot Multi • Spot • Multi Using the Macro Mode The Macro mode lets you focus automatically on close up subjects. The automatic focus operation starts when you press the shutter release button down half way. The following is the focus range in the Macro mode. Range: Approximately 10cm to 70cm (3.9˝ to 27.6˝) 1. Keep pressing [̆] ( ) until the focus mode indicator shows " ". 2. Record the image. • The focus and image recording operations are identical to those in the Auto Focus mode. • You can tell whether the image is focused by observing the focus frame and the green operation lamp. The indications of the focus frame and green operation lamp are the same as those in the Auto Focus mode. IMPORTANT! • In the Macro mode, the optical zoom range is 1X to 1.2X. Focus frame Focus frame 68
![](/manual_guide/products/casio-qvr41-owners-manual-c6e489a/68.png)