Celestron CGX-L Equatorial Mount and Tripod CGX-L Manual 5 Languages - Page 25

Appendix A, Upgrading the Firmware in Your Mount, and Hand Control

Get Celestron CGX-L Equatorial Mount and Tripod PDF manuals and user guides View all Celestron CGX-L Equatorial Mount and Tripod manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Appendix A: Upgrading the Firmware in Your Mount and Hand Control Setup overview (Figure 12.1 and 12.2) To check for new firmware updates, refer to this URL: http://software.celestron.com/updates/CFM/CFM/ 1. Plug your NexStar+ hand control into the AUX1 or AUX2 port. 2. Plug a USB mini cable from your PC to your hand control. 3. Plug power into the CGX-L and power it on. 4. Open Celestron Firmware Manager (CFM) 5. CFM will check your hardware and scan for updates. CFM will automatically determine which components will require updating. 6. Proceed to click "Update" in CFM and allow updates to complete. Items needed: 1. PC with CFM installed 2. Mini USB cable (Not included) 3. Included NexStar+ Hand Control 4.12VDC 3A power for the mount Aux Port NexStar+ Hand Control 12VDC 3A Power Supply Figure 12.1 Updating Mount and Hand Control Firmware User Supplied Mini USB Cable Figure 12.2 Updating Hand Control Firmware User Supplied Mini USB Cable NexStar+ Hand Control Items needed: 1. PC with CFM installed 2. Mini USB cable (Not included) 3. Included NexStar+ Hand Control * No additional power is required! ENGLISH | 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
ENGLISH |
25
Items needed:
1° PC with CFM installed
2° Mini USB cable (Not included)
3° Included NexStar+ Hand Control
4°12VDC 3A power for the mount
Figure 12.2
Updating Hand Control Firmware
Items needed:
1° PC with CFM installed
2° Mini USB cable (Not included)
3° Included NexStar+ Hand Control
* No additional power is required!
User Supplied
Mini USB Cable
NexStar+
Hand Control
User Supplied
Mini USB Cable
12VDC 3A
Power Supply
NexStar+
Hand Control
Aux Port
Appendix A:
Upgrading the Firmware in Your Mount
and Hand Control
Setup overview (Figure 12°1 and 12°2)
To check for new firmware updates, refer to this URL:
http://software°celestron°com/updates/CFM/CFM/
1° Plug your NexStar+ hand control into the AUX1 or
AUX2 port°
2° Plug a USB mini cable from your PC to your hand control°
3° Plug power into the CGX-L and power it on°
4° Open Celestron Firmware Manager (CFM)
5° CFM will check your hardware and scan for updates°
CFM will automatically determine which components
will require updating°
6° Proceed to click “Update” in CFM and allow updates
to complete°
Figure 12.1
Updating Mount and Hand Control Firmware