Cisco 7921G Administration Guide - Page 124

Changing Phone Settings Chapter 5 Configuring Settings on the Cisco Unified Wireless IP Phone Table 5-3 WLAN Configuration Settings (continued) Network Setting Password 802.11 Mode Call Power Save Mode Scan Mode Description For More Information, See... Password for the wireless network (up to 32 characters) Configuring the Username and Password, page 4-16 The wireless signal standard used in the WLAN. Options 802.11 Standards for WLAN are: Communications, page 2-3 • 802.11b/g • 802.11a • Auto-b/g • Auto-a • Auto-RSSI Automatically detects the type of power saving mode that active and idle phones require. The phone can use U-APSD or PS-Poll when it is idle. When the phone is in an active call, the power save mode is controlled by Call Power Save Mode. Networking Protocols Used with Cisco Unified Wireless IP Phones, page 2-7 Auto-Scans when on a call or when the strength signal Wireless Network Requirements (RSSI) is low. for VoIP, page 2-19 Continuous-Scans continuously even when it is not in a call. Single AP-Never scans except when the basic service set (BSS) is lost. Related Topics • Accessing Network and Phone Settings, page 5-1 • Configuring Network Profile Settings, page 5-2 • Configuring the Security Certificate on the Phone, page 5-12 • Changing Phone Settings, page 5-10 Changing Phone Settings The Phone Settings menu enables configuration of individual phones with ring tones or volume levels, display settings, keypad settings, and home page settings. Note You can control whether a Cisco Unified Wireless IP Phone 7921G has access to the Phone Settings menu from the Cisco Unified Communications Manager Administration Phone Configuration page. Use the Settings Access field in the Product Specific Configuration section of the phone configuration page. For more information, see the "Product-Specific Configuration Options for the Cisco Unified Wireless IP Phone 7921G" section on page 7-13. 5-10 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 OL-15985-01