Cisco 7921G Administration Guide - Page 147

Chapter 7 Configuring Features, Templates, Services, and Users Telephony Features Available for the Phone Table 7-1 Telephony Features for the Cisco Unified Wireless IP Phone 7921G (continued) Feature Description Configuration Reference Direct transfer Allows a user to connect two calls to each other (without For more information, refer to Cisco remaining on the line). Unified Communications Manager System Guide, "Cisco Unified IP Phones" chapter. Directed Call Park Allows a user to transfer an active call to an available directed call park number that the user dials or speed dials. After pressing Transfer, the user dials the directed call park number to store the call. Call Park BLF speed dial enables access to the directed call park number and indicates that the directed call park number is available or unavailable. Note If you implement Directed Call Park, avoid configuring the Park softkey. This prevents users from confusing the two Call Park features. For more information refer to: • Cisco Unified Communications Manager Features and Services Guide, "Call Park and Directed Call Park" chapter. • Modifying Phone Button Templates, page 7-17 Directed Call Pickup Allows a user to pick up an alerting call from a specific DN For more information refer to Cisco by pressing the group pickup softkey followed by the DN Unified Communications Manager where the call is ringing. Features and Services Guide. Do Not Disturb (DND) When DND is turned on, no audible rings occur during the ringing-in state of a call or no audible or visual notifications of any type occur. You can configure the phone to have a softkey template with a DND softkey or a phone-button template. Note DND is available in Cisco Unified Communications Manager 6.0(1), 6.1(1), or 7.0(1) only. For more information, refer to: • Cisco Unified CallManager Features and Services Guide, "Do Not Disturb" chapter. • Cisco Unified Communications Manager Administration Guide. The following DND parameters are configurable in Cisco Unified Communications Manager Administration: • DND-This checkbox allows you to enable DND on a per-phone basis. Use Cisco Unified Communications Manager Administration > Device > Phone > Phone Configuration. • DND Option-Choose "Call Reject" (to turn off all audible and visual notifications), or "Ringer Off" (to turn off only the ringer). DND Option appears on both the Common Phone Profile window and the Phone Configuration window (Phone Configuration window value takes precedence). • DND Incoming Call Alert-Choose the type of alert to play, if any, on a phone for incoming calls when DND is active. This parameter is located on both the Common Phone Profile window and the Phone Configuration window (Phone Configuration window value takes precedence). • BLF Status Depicts DND-Enables DND status to override busy/idle state. OL-15985-01 Cisco Unified Wireless IP Phone 7921G Administration Guide for Cisco Unified Communications Manager Release 7.0 7-7