Cisco AP541N-A-K9 Administration Guide - Page 115
Security Level, Write Views, Read Views, SNMPv3 Groups, Table 27, Field, Description, Apply, Remove
View all Cisco AP541N-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
SNMP Configuring SNMP on the Access Point 5 Table 27 SNMPv3 Groups Field Security Level Description Select one of the following security levels for the group: noAuthentication-noPrivacy-No authentication and no data encryption (no security). Authentication-noPrivacy-Authentication, but no data encryption. With this security level, users send SNMP messages that use an MD5 key/password for authentication, but not a DES key/password for encryption. Authentication-Privacy-Authentication and data encryption. With this security level, users send an MD5 key/password for authentication and a DES key/ password for encryption. Write Views For groups that require authentication, encryption, or both, you must define the MD5 and DES key/ passwords on the SNMPv3 Users page. Select the write access to management objects (MIBs) for the group: Read Views write-all-The group can create, alter, and delete MIBs. write-none-The group is not allowed to create, alter, or delete MIBS. Select the read access to management objects (MIBs) for the group: SNMPv3 Groups view-all-The group is allowed to view and read all MIBs. view-none-The group cannot view or read MIBs. This field shows the default groups and the groups that you have defined on the access point. To remove a group, select the group and click Remove. NOTE After you configure the SNMPv3 Groups settings, you must click Apply to apply the changes and to save the settings. Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 112