Cisco AP541N-A-K9 Administration Guide - Page 158
Clustering Multiple Access Points, Table 42, Cluster Member Details, Field, Description, MAC Address
View all Cisco AP541N-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
7 Clustering Multiple Access Points Viewing Wireless Neighborhood Information Table 42 Cluster Member Details Field SSID Description The Service Set Identifier (SSID) this access point is on. The SSID is an alphanumeric string of up to 32 characters that uniquely identifies a wireless local area network. It is also referred to as the Network Name. MAC Address A guest network and an Internal network running on the same access point must have two different network names. Shows the MAC address of the neighboring access point. Channel A MAC address is a hardware address that uniquely identifies each node of a network. Shows the channel on which the access point is broadcasting. Rate The Channel defines the portion of the radio spectrum that the radio uses for transmitting and receiving. Shows the rate (in megabits per second) at which this access point is currently transmitting. The current rate will always be one of the rates shown in Supported Rates. Signal Indicates the strength of the radio signal emitting from this access point measured in decibels (Db). Beacon Interval Shows the Beacon interval being used by this access point. Beacon Age Beacon frames are transmitted by an access point at regular intervals to announce the existence of the wireless network. The default behavior is to send a beacon frame once every 100 milliseconds (or 10 per second). Shows the date and time of the last beacon received from this access point. 155 Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide