Cisco AP541N-A-K9 Administration Guide - Page 151
Viewing the Last Proposed Set of Changes, Last Proposed Changes
View all Cisco AP541N-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Clustering Multiple Access Points Configuring and Viewing Channel Management Settings 7 Table 38 Channel Assignments Field Locked Description Click Locked to force the access point to remain on the current channel. When Locked is selected (enabled) for an access point, automated channel management plans do not re-assign the access point to a different channel as a part of the optimization strategy. Instead, access points with locked channels are factored in as requirements for the plan. If you click Apply, you will see that locked access points show the same channel for the Current Channel and Proposed Channel fields. The locked access points keep their current channels. Viewing the Last Proposed Set of Changes The Proposed Channel Assignments shows the last channel plan. The plan lists all access points in the cluster by IP Address, and shows the current and proposed channels for each access point. Locked channels will not be reassigned and the optimization of channel distribution among access points will take into account the fact that locked access points must remain on their current channels. access points that are not locked may be assigned to different channels than they were previously using, depending on the results of the plan. Table 39 Last Proposed Changes Field IP Address Wireless Radio Proposed Channel Description IP address for the access point. Radio channel on which this access point is currently broadcasting. Radio channel to which this access point would be re-assigned if the Channel Plan is executed. Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 148