Cisco AP541N-A-K9 Administration Guide - Page 41

Status Rogue AP Detection 2 Table 6 Neighboring Access Point Information Field Description Channel Shows the Channel on which the detected access point is broadcasting. The channel defines the portion of the wireless radio spectrum that the wireless radio uses for transmitting and receiving. The channel for your access point is set in Wireless > Advanced Settings. (See Modifying Advanced Settings, page 79.) Rate Shows the rate (in megabits per second) at which the detected access point is currently transmitting. Signal Beacons Last Beacon Rates The current rate is always one of the rates shown in Supported Rates. Indicates the strength of the wireless radio signal emitting from the detected access point. If you hover the mouse pointer over the bars, a number appears and shows the strength in decibels (dB). Shows the total number of beacons received from the detected access point since it was first discovered. Shows the date and time of the last beacon received from the detected access point. Shows supported and basic (advertised) rate sets for the detected access point. Rates are shown in megabits per second (Mbps). All Supported Rates are listed, with Basic Rates shown in bold. Rate sets are configured on the Wireless > Advanced Settings page. (See Modifying Advanced Settings, page 79.) Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 38