Cisco AP541N-A-K9 Administration Guide - Page 43
Setup, LAN Settings
View all Cisco AP541N-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3 Setup LAN Settings The default wired LAN interface settings, including the default DHCP and VLAN parameters, might not work correctly for your network. By default, the DHCP client on the access point broadcasts requests for network information. To use a static IP address, you must disable the DHCP client and manually configure the IP address and other network information. The access point default management VLAN is VLAN 1. This VLAN is also the default untagged VLAN. If you have configured the management VLAN on your network with a different VLAN ID, you must change the VLAN ID of the access point management VLAN. To configure the LAN interface settings, click the LAN Settings tab. Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 40