Cisco AP541N-A-K9 Administration Guide - Page 81

Wireless Client Connection Control 4 Table 17 MAC Authentication Field Descriptions Field Stations List Description This is the local list of clients that are either permitted or denied access to the network through the access point. To add a MAC Address to the local Stations List, enter its 48bit MAC address into the MAC Address text boxes, then click Add. To remove a MAC Address from the Stations List, select its 48-bit MAC address, then click Remove. The stations in the list will either be allowed or denied access based on how you set the filter in the previous field. NOTE: If the MAC authentication type for the VAP is set to Local, the access point uses the Stations List to permit or deny the clients access to the network. If the MAC authentication type is set to RADIUS, the access point ignores the MAC addresses configured in this list and uses the list that is stored on the RADIUS server. The MAC authentication type is set on the VAP configuration page. NOTE After you configure local MAC Authentication settings, you must click Apply to apply the changes and to save the settings. Changing some settings might cause the access point to stop and restart system processes. If this happens, wireless clients will temporarily lose connectivity. We recommend that you change access point settings when WLAN traffic is low. Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide 78