Cisco CISCO1401 Software Guide - Page 120
encryption, mode wep, optional, key-hash, mandatory, copy running-config startup-config, Enable WEP
![]() |
UPC - 746320202785
View all Cisco CISCO1401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Configuring WEP and WEP Features Chapter 9 Configuring WEP and WEP Features Step 3 Step 4 Step 5 Command Purpose encryption [vlan vlan-id] mode wep {optional [key-hash] | mandatory [mic] [key-hash]} Enable WEP, MIC, and TKIP. • (Optional) Select the VLAN for which you want to enable WEP and WEP features. • Set the WEP level and enable TKIP and MIC. If you enter optional, another bridge can associate to the bridge with or without WEP enabled. You can enable TKIP with WEP set to optional but you cannot enable MIC. If you enter mandatory, other bridges must have WEP enabled to associate to the bridge. You can enable both TKIP and MIC with WEP set to mandatory. Note If you enable WEP with MIC, use the same WEP key as the transmit key in the same key slot on both root and non-root bridges. end Return to privileged EXEC mode. copy running-config startup-config (Optional) Save your entries in the configuration file. Use the no form of the encryption command to disable WEP or to disable WEP features. This example sets WEP to mandatory for VLAN 1 and enables MIC and TKIP. bridge# configure terminal bridge(config)# configure interface dot11radio 0 bridge(config-if)# encryption vlan 1 mode wep mandatory mic key-hash bridge(config-if)# end Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide 9-4 OL-4059-01
![](/manual_guide/products/cisco-cisco1401-software-guide-337473e/120.png)