Cisco CISCO1401 Software Guide - Page 232
Reloading the Image Using the Web Browser Interface, Browser HTTP Interface
![]() |
UPC - 746320202785
View all Cisco CISCO1401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Working with Software Images Chapter 17 Managing Firmware and Configurations Reloading the Image Using the Web Browser Interface You can also use the Web browser interface to reload the bridge image file. The Web broswer interface supports loading the image file using HTTP or TFTP interfaces. Note Your bridge configuration is not changed when using the browser to reload the image file. Browser HTTP Interface The HTTP interface allows you to browse to the bridge image file on your PC and download the image to the bridge. Follow the instructions below to use the HTTP interface: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x). Enter the bridge's IP address in the browser address line and press Enter. An Enter Network Password screen appears. Enter your username in the User Name field. Enter the bridge password in the Password field and press Enter. The Summary Status page appears. Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears. Click the Browse button to locate the image file on your PC. Click the Upload button. For additional information, click the Help icon on the Software Upgrade screen. Browser TFTP Interface The TFTP interface allows you to use a TFTP server on a network device to load the bridge image file. Follow the instructions below to use a TFTP server: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Open your Internet browser. You must use Microsoft Internet Explorer (version 5.x or later) or Netscape Navigator (version 4.x). Enter the bridge's IP address in the browser address line and press Enter. An Enter Network Password screen appears. Enter your username in the User Name field. Enter the bridge password in the Password field and press Enter. The Summary Status page appears. Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears. Click the TFTP Upgrade tab. Enter the IP address for the TFTP server in the TFTP Server field. Enter the file name for the bridge image file in the Upload New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory, include the relative path of the TFTP server root directory with the filename. If the file is located in the TFTP root directory, enter only the filename. 17-32 Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide OL-4059-01
![](/manual_guide/products/cisco-cisco1401-software-guide-337473e/232.png)