Cisco CISCO1401 Software Guide - Page 214
Uploading a Configuration File by Using FTP, con terminal, ip ftp username, ip ftp password
![]() |
UPC - 746320202785
View all Cisco CISCO1401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 214 highlights
Working with Configuration Files Chapter 17 Managing Firmware and Configurations Connected to 172.16.101.101 Loading 1112 byte file host1-confg:![OK] BR# %SYS-5-CONFIG: Configured from host1-config by ftp from 172.16.101.101 This example shows how to specify a remote username of netadmin1. The software copies the configuration file host2-confg from the netadmin1 directory on the remote server with an IP address of 172.16.101.101 to the bridge startup configuration. BR# configure terminal BR(config)# ip ftp username netadmin1 BR(config)# ip ftp password mypass BR(config)# end BR# copy ftp: nvram:startup-config Address of remote host [255.255.255.255]? 172.16.101.101 Name of configuration file[rtr2-confg]? host2-confg Configure using host2-confg from 172.16.101.101?[confirm] Connected to 172.16.101.101 Loading 1112 byte file host2-confg:![OK] [OK] BR# %SYS-5-CONFIG_NV:Non-volatile store configured from host2-config by ftp from 172.16.101.101 Uploading a Configuration File by Using FTP Beginning in privileged EXEC mode, follow these steps to upload a configuration file by using FTP: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Command Purpose Verify that the FTP server is properly configured by referring to the "Preparing to Download or Upload a Configuration File by Using FTP" section on page 17-13. Log into the bridge through a Telnet session. configure terminal Enter global configuration mode. This step is required only if you override the default remote username or password (see Steps 4, 5, and 6). ip ftp username username (Optional) Change the default remote username. ip ftp password password (Optional) Change the default password. end Return to privileged EXEC mode. copy system:running-config Using FTP, store the bridge running or startup configuration ftp:[[[//[username[:password]@]location]/directory] file to the specified location. /filename] or copy nvram:startup-config ftp:[[[//[username[:password]@]location]/directory] /filename] This example shows how to copy the running configuration file named ap2-confg to the netadmin1 directory on the remote host with an IP address of 172.16.101.101: BR# copy system:running-config ftp://netadmin1:[email protected]/ap2-confg Write file ap2-confg on host 172.16.101.101?[confirm] 17-14 Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide OL-4059-01
![](/manual_guide/products/cisco-cisco1401-software-guide-337473e/214.png)