Cisco CISCO1401 Software Guide - Page 157
bridge-group, bridge, protocol ieee, interface fastEthernet0.x, encapsulation dot1q, native
![]() |
UPC - 746320202785
View all Cisco CISCO1401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Chapter 12 Configuring VLANs Configuring VLANs Command Step 4 bridge-group number Step 5 exit Step 6 interface fastEthernet0.x Step 7 encapsulation dot1q vlan-id [native] Step 8 bridge-group number Step 9 Step 10 Step 11 exit interface dot11radio 0 ssid ssid-string Step 12 vlan vlan-id Step 13 infrastructure-ssid Purpose Assign the subinterface to a bridge group. You can number your bridge groups from 1 to 255. Note When you enter the bridge-group command, the bridge enables the subinterface to be ready to participate in STP when you enter the bridge n protocol ieee command. See Chapter 8, "Configuring Spanning Tree Protocol," for complete instructions on enabling STP on the bridge. Return to global configuration mode. Create an Ethernet subinterface and enter interface configuration mode for the subinterface. Enable a VLAN on the subinterface. (Optional) Designate the VLAN as the native VLAN. On many networks, the native VLAN is VLAN 1. Assign the subinterface to a bridge group. You can number your bridge groups from 1 to 255. Return to global configuration mode. Enter interface configuration mode for the radio interface. Create an SSID and enter SSID configuration mode for the new SSID. The SSID can consist of up to 32 alphanumeric characters. SSIDs are case sensitive. You can create only one SSID on the bridge. Note You use the ssid command's authentication options to configure an authentication type for each SSID. See Chapter 10, "Configuring Authentication Types," for instructions on configuring authentication types. Assign the SSID to the native VLAN. Designate the SSID as the infrastructure SSID. The root bridge allows associations only from non-root bridges that use this SSID. OL-4059-01 Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide 12-5
![](/manual_guide/products/cisco-cisco1401-software-guide-337473e/157.png)