Cisco CISCO1401 Software Guide - Page 33

Chapter 2 Configuring the Bridge for the First Time Using the IP Setup Utility Obtaining and Installing IPSU IPSU is available on the Cisco web site. Follow these steps to obtain and install IPSU: Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Use your Internet browser to access the Cisco Software Center at the following URL: http://www.cisco.com/cisco/software/navigator.html Click Cisco Aironet Wireless LAN Client Adapters. Scroll down to the Windows Utility section. Click Cisco Aironet Client Utility (ACU) for Windows. Click the file IPSUvxxxxxx.exe. The vxxxxxx identifies the software package version number. Read and accept the terms and conditions of the Software License Agreement. Download and save the file to a temporary directory on your hard drive and then exit the Internet browser. Double-click IPSUvxxxxxx.exe in the temporary directory to expand the file. Double-click Setup.exe and follow the steps provided by the installation wizard to install IPSU. The IPSU icon appears on your computer desktop. Using IPSU to Find the Bridge's IP Address If your bridge receives an IP address from a DHCP server, you can use IPSU to find its IP address. Because IPSU sends a reverse-ARP request based on the bridge MAC address, you must run IPSU from a computer on the same subnet as the bridge. Follow these steps to find the bridge's IP address: Step 1 Double-click the IPSU icon on your computer desktop to start the utility. The IPSU screen appears (see Figure 2-3). Figure 2-3 IPSU Get IP Address Screen Step 2 When the utility window opens, make sure the Get IP addr radio button in the Function box is selected. OL-4059-01 Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide 2-9