Cisco CISCO1401 Software Guide - Page 260
Channels, IEEE 802.11a (5-GHz Band), Maximum Power Levels, 5.8-GHz Band
![]() |
UPC - 746320202785
View all Cisco CISCO1401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
Channels Appendix A Channels and Antenna Settings Channels IEEE 802.11a (5-GHz Band) The channel identifiers, channel center frequencies, and regulatory domain of each 20-MHz-wide channel are shown in Table A-1. . Table A-1 Channels for IEEE 802.11a Center Regulatory Domains Channel Frequency Americas - - - Identifier (MHz) (-A) 149 5745 X - - - 153 5765 X - - - 157 5785 X - - - 161 5805 X - - - This product is for outdoor use with regard to the channel identifiers indicated in Table A-1. Maximum Power Levels 5.8-GHz Band An improper combination of power level and antenna configurations can result in equivalent isotropic radiated power (EIRP) above the amount allowed per regulatory domain. Table A-2 indicates the maximum power levels and antenna gains allowed. Table A-2 Maximum Power Levels and Antenna Gains Maximum Power Settings Regulatory Domains Americas (-A) Orientation P2P1 P2MP2 9-dBi Omnidirectional Antenna 24 dBm 24 dBm 9.5-dBi Sector Antenna 24 dBm 24 dBm 22.5-dBi Integrated Antenna 24 dBm 123 dBm4 28-dBi Dish Antenna 22 dBm na 1. Point to point. 2. Point to multipoint. 3. A maximum of 13 dBm is allowed, but that setting is not supported by the bridge. 4. On point-to-multipoint links, the remote bridges communicating with the central bridge are allowed to use a maximum power setting of 24 dBm. The central bridge is limited to a maximum power setting of 12 dBm. Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide A-2 OL-4059-01
![](/manual_guide/products/cisco-cisco1401-software-guide-337473e/260.png)