Cisco CISCO776 Installation Guide - Page 100
International ISDNSwitch Types, EURO-ISDN Switch Type, Multiple Subscriber Numbers with 1TR6
View all Cisco CISCO776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
International ISDN Switch Types International ISDN Switch Types Cisco 700 series routers support most international switch types. International ISDN lines generally use one of the following switch types: • EURO-ISDN (also known as NET3) • 1TR6 • TPH • Nippon Telegraph and Telephone (NTT) Note International ISDN lines are not assigned SPIDs. EURO-ISDN Switch Type The EURO-ISDN switch type, also known as NET3, is used in Europe and parts of Asia, including the United Kingdom, France, Germany, Singapore, and Taiwan. Enter the show version command to verify that the software loaded on your Cisco 700 series router is ISDN Stack Revision NET3 2.10. If the correct software is not loaded on your router, contact your customer service representative. 1TR6 ISDN Switch Type The 1TR6 switch type is used in Germany. Enter the show version command to verify that the software loaded on your router is ISDN Stack Revision 1TR6 2.10. If the correct software is not loaded on your router, contact your customer service representative. Multiple Subscriber Numbers with 1TR6 The 1TR6 lines can be configured for multiple subscriber numbers, usually referred to as "extended addressing" in Germany. The line is usually assigned a group of eight sequential directory numbers that can be used for the different pieces of terminal equipment used on the ISDN line. These numbers are also used for allocation to the analog telephone port and for call routing. C-4 Cisco 700 Series Router Installation Guide