Cisco CISCO776 Installation Guide - Page 58
Country-Specific Dialing Instructions, Dialing with INS ISDN Lines for Japan
View all Cisco CISCO776 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Country-Specific Dialing Instructions Step 2 Step 3 Dial the second call. When the second call is answered, perform a short on-hook to connect the original caller. Country-Specific Dialing Instructions Integrated Network Service (INS) ISDN lines are used in Japan. NET3 lines are used throughout Europe and parts of Asia. 1TR6 ISDN lines are used throughout Europe. This section describes analog telephone dialing instructions specific to these countries. Dialing with INS ISDN Lines for Japan To make an analog telephone call over INS ISDN lines in Japan from a telephone connected to Cisco 700 series routers, take the following steps: Step 1 Enter each individual number (called a dialing digit) of the telephone number on the telephone keypad. You must enter each successive dialing digit within 6 seconds of entering the previous digit. If you wait longer than 6 seconds, an incomplete set of dialing digits is sent to the switch. Step 2 Send the entire set of dialing digits to the switch in one of the following ways: • Press the pound (#) key on the telephone keypad. • Wait 6 seconds without entering any more dialing digits on the telephone keypad. After 6 seconds, the set of dialing digits is automatically sent to the switch. 4-10 Cisco 700 Series Router Installation Guide