Cisco SRW2008P User Guide - Page 26

Cisco SRW2008P - Small Business Managed Switch Manual

Get Cisco SRW2008P - Small Business Managed Switch PDF manuals and user guides
UPC - 745883571024
View all Cisco SRW2008P manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Chapter 5 Advanced Configuration Speed The connection speed of the port is displayed here. The speed can be configured only when auto-negotiation is disabled on that port. Port Configuration Detail Port Management > Port Settings Duplex This is the port duplex mode, Full (transmission occurs in both directions simultaneously) or Half (transmission occurs in only one direction at a time). This mode can be configured only when auto-negotiation is disabled and port speed is set to 10Mbps or 100Mbps. It cannot be configured on Link Aggregation Groups (LAGs). MDI/MIDX This is the MDI/MDIX status of the port. The MDI setting is used if the port is connected to an end station. The MDIX setting is used if the port is connected to a hub or another switch. Flow Control This is the flow control status of the port. It is active when the port uses Full Duplex Mode. LAG This indicates if the port is part of a LAG. Type Displays the port type. PVE When a port is a Private VLAN Edge (PVE) port, it bypasses the Forwarding Database and forwards all unicast, multicast, and broadcast traffic to an uplink. Uplinks can be ports or LAGs. Detail The Detail button will open the Port Configuration Detail screen. 8-Port 10/100/1000 Gigabit Switch with Webview Port Management > Port Configuration Port The number of the port. Description Displays a brief description of the port (can be entered by clicking on the Detail button). Port Type This is the port type. Admin Status The port can be taken offline by selecting the Down option. When Up is selected, the port can be accessed normally. Current Port Status The current status of the port is displayed here. Reactivate Suspended Port If you want to reactivate a port that has been suspended, click the checkbox. Operational Status This indicates whether or not the port is active. Admin Speed Change the speed of the port here. Current Port Speed The current speed of the port is displayed here. Admin Duplex Change the duplex mode here. Current Duplex Mode This is the duplex mode of the port. Auto Negotiation You can enable or disable the port's Auto Negotiation feature. If using an SFP module, Auto Negotiation for the specific port should be set to Disable. Current Auto Negotiation This is the current setting of the port's Auto Negotiation feature. Admin Advertisement Specifies the capabilities to be advertised by the port. Multiple options may be selected or Max Capability can be selected to cover all of the options. The available options are: 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Chapter 5
Advanced Configuration
20
8-Port 10/100/1000 Gigabit Switch with Webview
Speed
The connection speed of the port is displayed here.
The speed can be configured only when auto-negotiation
is disabled on that port.
Port Management > Port Settings
Duplex
This is the port duplex mode, Full (transmission
occurs
in
both
directions
simultaneously)
or
Half
(transmission occurs in only one direction at a time). This
mode can be configured only when auto-negotiation is
disabled and port speed is set to 10Mbps or 100Mbps.
It cannot be configured on Link Aggregation Groups
(LAGs).
MDI/MIDX
This is the MDI/MDIX status of the port. The
MDI setting is used if the port is connected to an end
station. The MDIX setting is used if the port is connected
to a hub or another switch.
Flow Control
This is the flow control status of the port. It
is active when the port uses Full Duplex Mode.
LAG
This indicates if the port is part of a LAG.
Type
Displays the port type.
PVE
When a port is a Private VLAN Edge (PVE) port,
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
Uplinks can be ports or LAGs.
Detail
The
Detail
button will open the
Port Configuration
Detail
screen.
Port Configuration Detail
Port Management > Port Configuration
Port
The number of the port.
Description
Displays a brief description of the port (can
be entered by clicking on the Detail button).
Port Type
This is the port type.
Admin Status
The port can be taken offline by selecting
the Down option. When Up is selected, the port can be
accessed normally.
Current Port Status
The current status of the port is
displayed here.
Reactivate Suspended Port
If you want to reactivate a
port that has been suspended, click the checkbox.
Operational Status
This indicates whether or not the
port is active.
Admin Speed
Change the speed of the port here.
Current Port Speed
The current speed of the port is
displayed here.
Admin Duplex
Change the duplex mode here.
Current Duplex Mode
This is the duplex mode of the
port.
Auto Negotiation
You can enable or disable the port’s
Auto Negotiation feature. If using an SFP module, Auto
Negotiation for the specific port should be set to Disable.
Current Auto Negotiation
This is the current setting of
the port’s Auto Negotiation feature.
Admin Advertisement
Specifies the capabilities to be
advertised by the port. Multiple options may be selected
or Max Capability can be selected to cover all of the
options. The available options are: