Cisco SRW2008P User Guide - Page 28
Select Ports - user manual
UPC - 745883571024
View all Cisco SRW2008P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 5 Advanced Configuration Current Status Indicates if the LAG is currently operating. Reactivate Suspended LAG Reactivates a LAG if the LAG has been disabled as a result of a port lock or ACL operation. Admin Auto Negotiation Enables or disables Auto Negotiation on the LAG. Auto-negotiation is a protocol between two link partners that enables a LAG to advertise its transmission rate, duplex mode and flow control (the flow control default is disabled) abilities to its partner. Current Auto Negotiation The current Auto Negotiation setting. Admin Speed The configured speed at which the LAG is operating. Current LAG Speed The current speed at which the LAG is operating. Admin Flow Control Enables or disables flow control or enables the auto negotiation of flow control on the LAG. Current Flow Control The user-designated Flow Control setting. PVE Displays the PVE group to which the LAG is configured. Select Ports Ports Displays the ports that are members of the selected LAG. Port Management > LACP Aggregate ports can be linked into link-aggregation port groups. Each group is comprised of ports with the same speed, set to full-duplex operation. Aggregated Links can be manually setup or automatically established by enabling Link Aggregation Control Protocol (LACP) on the relevant links. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. The LACP screen contains fields for configuring LACP LAGs. Port Management > LACP LACP System Priority (1-65535) Indicates the global LACP priority value. The possible range is 1- 65535. The default value is 1. Port Defines the port number to which timeout and priority values are assigned. LACP Port Priority Defines the LACP priority value for the port. The field range is 1-65535. LACP Timeout Administrative LACP timeout. A short or Long timeout value can be selected. Long is the default. Admin Key A channel will only be formed between ports having the same admin key. This only applies to ports located on the same switch. Port Management > PoE Power Settings 8-Port 10/100/1000 Gigabit Switch with Webview Port Management > PoE Power Settings Port Displays the selected port's number. 22