Cisco SRW2008P User Guide - Page 30
Ingress Filtering, Access, Trunk, General, Tagged, Untagged, Forbidden, Exclude, Interface, Join
UPC - 745883571024
View all Cisco SRW2008P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Chapter 5 Advanced Configuration PVID Assigns a VLAN ID to untagged packets. The possible values are 2 to 4094. VLAN 4095 is defined as per standard and industry practice as the discard VLAN. Packets classified to the Discard VLAN are dropped. Ingress Filtering Enables or disables Ingress filtering on the port. Ingress filtering discards packets which do not include an ingress port. LAG Indicates the LAG to which the VLAN is defined. VLAN Management > Ports to VLAN The Ports to VLAN screen contains fields for configuring ports to a VLAN. The port default VLAN ID (PVID) is configured on the Create VLAN screen. All untagged packets arriving to the device are tagged by the ports PVID. Tagged Defines the interface as a tagged member of a VLAN. All packets forwarded by the interface are tagged. The packets contain VLAN information. Untagged Packets forwarded by the interface are untagged. Forbidden Forbidden ports are not included in the VLAN. Exclude Excludes the interface from the VLAN. However, the interface can be added to the VLAN through GVRP. VLAN Management > VLAN to Ports VLAN Management > Ports to VLAN The Ports to VLAN screen contains a Port Table for VLAN parameters for each ports. Ports are assigned VLAN membership by selecting and configuring the presented configuration options. VLAN The VLAN number. Access Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access port. Trunk Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be untagged. General Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). 8-Port 10/100/1000 Gigabit Switch with Webview VLAN Management > VLAN to Ports The VLAN to Ports screen contains fields for configuring VLANs to a ports. Interface Displays the interface number. Mode Indicates the port to VLAN mode. The possible field values are: General Indicates the port belongs to VLANs, and each VLAN is user-defined as tagged or untagged (full 802.1Q mode). Access Indicates the port belongs to a single untagged VLAN. When a port is in Access mode, the packet types which are accepted on the port cannot be designated. Ingress filtering cannot be enabled/disabled on an access port. Trunk Indicates the port belongs to VLANs in which all ports are tagged, except for one port that can be untagged. Join VLAN Defines the VLANs to which the interface is joined. VLANs Displays the PVID tag. 24